LE GIA SEAL MATERIAL CO., LTD.

43/14/17 Cong Hoa Str., Ward 4, Tan Binh Dist., HCMC, Vietnam

Tel: 84.8.38116383 - Fax: 84.8.3811 1867 - Email: legiasealtech@gmail.com

|

NEW PRODUCTs

NEWS

Support

Sales 1

Sales 2

RUBBER - EPDM 5Mpa

RUBBER - EPDM 5Mpa

Description: EPDM (ethylene propylene rubber) EPM can only be vulcanized by peroxides or radiation; whereas EPDM can be vulcanized conventionally using sulfur.Excellent inherent at wide range temperature from -45°C to +120°C for standard compounds and special compounding can increase some grades to function continually at +140°C. E.P's are inherently resistant to attack by oxygen, U.V., Ozone and extreme weather environment.But do not have good adhesion properties.Resistance to Chemicals: Resistant to many chemicals and solvents. Good resistance to corrosive chemicals. The performance of E.P's in hot water and high pressure steam is better than in dry heat.

Send Inquiry Now Live Chat Now

Detailed Product Description: RUBBER - EPDM 5Mpa

Thickness  
Description  
Length  
width  
Density (g/cm3) 1.15
Hardness (Shore A) 60± 5
tension strength at beak (kn/m)  
tension strength (mpa) 5
tensile strength (%)  
elongation at break (%) 400
Viscosity  
Abrasion medium
Ozone – resistant medium
Weather – resistant medium
Oil – resistant no
Fuel – resistant no
Acid – resistant medium
organic solvent  
temperature limit (°C)  
Tensile force (mpa)  

Relative Product

free hit counter Copyright © 2013 Le Gia